About Sanitary Stainless Steel

Industry standards for Sanitary Tubes, Fittings, and Valves, such as ASTMA270, 3A, DIN11850, ISO2037, and EN10357.

Here we compare the most commonly used sanitary reducers.

KF originates from the German term “Klein Flansche”, which means “small flanges”. They are a type of flange system designed to be assembled and disassembled without needing specials tools. An O-ring and centering ring seal is sandwiched by two KF flanges, and is fastened with a quick release clamp without tools. KF Flange KF Flange KF flanges are commonly used in industries such as laboratories and research facilities, semiconductor manufacturing, and analytical instruments s

Static Spray Ball This is the most basic form of cleaning and is as simple as it looks. Media from the Static Fixed Spray Ball hits the...

Sanitary Valves are Cleanable Dairy valves, fittings and tubing, also known as hygienic valves fittings and tubing, were created and used mainly because they are cleanable, either by dismantling a pipe line and cleaning it manually or using a CIP (clean in place) system. Can be dismantled for cleaning Hygienic Valve Design Sanitary fittings and valves do not contain pockets, threading, or tight bends to prevent areas that are difficult to clean. This limits entrapment areas w

Virtually all Malaysian food and beverage manufacturers agree that stainless steel is the go-to material when it comes to food preparation and processing. Modern commercial and home kitchens are filled with stainless steel appliances and fixtures. Stainless steel has a proven track record of success in areas where sanitation and cleanability is important. It is preferred because of its aesthetic, easy maintenance, corrosion resistant characteristics. Stainless Steel Tanks, Tu

What are mill certificates, and what do they show.

This article aims to very briefly explain what is the 3A standard, which is mentioned quite often in dairy tubing, piping, valves, and fittings. It will talk abit about what it means, and how it was created. 3A Standard Logo The 3-A Sanitary Standards, Inc is an organization formed by the International Association for Food Protection, the Food Processing Suppliers Association, the International Dairy Foods Association and the American Dairy Products Institute, the 3-A Adminis

Sanitary Tubes with Ferrule Ends This article hopes to briefly explain the difference between SS 304 and SS 316, the most commonly used Stainless Steel Steel in the Malaysian food industry. Difference in composition In terms of chemical composition, the main difference is that SS 316 contains Molybdenum and slightly more Nickel content compared to SS 304. Both materials are available in low carbon versions, bringing the carbon content down to 0.03%. sanitary fittings 304 and

This article will talk about the most commonly used types of welding for sanitary valves, tubes and fittings in Malaysia. The most popular welding method in the food world is arc welding, which consists of MIG (metal inert gas) and TIG (tungsten inert gas). MIG, where the welding rod is often automatically fed is sometimes used, but mostly only on structural parts, skid frames for example. TIG is a form of arc welding where the filler metal is manually hand fed by the welder.

What is Sanitary / Food Grade Polishing, and how is it measured. Different Internal Polishing How Surface Finish Is Measured Surface polishing refers to the roughness of of the stainless steel surface. ​ We most commonly measure it using Ra, the average height of the peaks and valleys on the stainless steel surface. The lower the number, the smoother the surface. The Ra can be measured using an expensive machine called a profilometer, it works by dragging a stylus across the